# FRTN05 - Nonlinear Control and Servo Systems

Syllabus | Schedule |

In real life, most control systems are nonlinear in one way or the other (nonlinear dynamics, actuation saturations, sensor nonlinearities, etc). While a controller designed for linear systems may continue to work well in many nonlinear systems, this is not always the case. In some situations, nonlinear effects must be taken into account in order to get acceptable performance. In the course Nonlinear Control and Servo Systems (FRTN05) we study common nonlinearities and how to handle those, treat different analysis methods and learn how to do control synthesis for nonlinear systems, both in theory and practice.

## News

2019-01-16 The exam with solutions is available here. The grading is expected to be done towards the end of next week.

2019-01-07: Extra session for questions Friday January 11 at 13.15-15.00 in the seminar room 2112B of Automatic Control.

2018-12-03: Sign-up for lab 3 is open.

2018-11-26: Sign-up for lab 2 is open.

2018-11-19: Sign-up for lab 1 is open.

### Lecturer

Anders Rantzer, (course responsible) M-building (fifth floor, room 5143) 046 - 222 87 83

**Teaching assistants **

Mattias Fält, M-building (second floor), 046-222 08 47

Olof Troeng, M-building (second floor), 046-222 97 43

### Literature

Recommended textbook is

- Glad, T., and Ljung,L., "Reglerteori: Flervariabla och olinjära metoder" (2003, Studentlitteratur, Lund, ISBN 9-14-403003-7) or the English translation "Control Theory: Multivariable and Nonlinear Methods", 2000, Taylor & Francis Ltd, ISBN 0-74-840878-9. Chapter 11-16,18. This book covers MPC and Optimal control which are not covered in the other text book. The first part of this book (Ch. 1-10) covers linear control theory and is useful for the course Multivariable Control - (FRTN10 Flervariabel reglering)

An alternative reference is

- Khalil, H. K., Nonlinear Systems (3rd ed., 2002, Prentice Hall, ISBN 0-13-122740-8). This is a good textbook on nonlinear control systems, at a bit more advanced level than the course.

Handouts: Lecture notes and extra material will be handed out and posted on this website.

### Lectures and Exercises

Lectures on Mondays are held at 13.15-15.00, other days at 08.15-10.00. Lectures are held in **M:E** (except for November 14 when it is in the Automatic Control seminar room M:2112B on the second floor in the M-building.)

The exercises are held Tuesdays and Wednesdays 15:15-17:00 in **lab A** and **lab B** of the Automatic Control Department, first floor of the M-building. See Exercise schedule and problem set.

*The lecture slides will be handed out during the lectures. Below you find last edition's versions to be replaced when the lecture is given (indicated by red or green bullet). *

Monday 5/11: L1: Introduction. Typical nonlinear problems and phenomena. Models. (2018)

Wednesday 7/11: L2: Linearization. Stability. Controllability. Simulation. (2018)

Friday 9/11: L3: Phase-plane analysis. Classification of singular points. Stability of periodic solutions. (2018)

Monday 12/11: L4: Lyapunov methods. (2018)

Wednesday 14/11: L5: Stability theory. Small gain theorem. Circle criteria. Passivity. (2018)

Friday 16/11: L6: Describing function analysis. (2018)

Monday 19/11: L7: Saturation and antiwindup. Friction. (2018)

Wednesday 21/11: L8: Compensation for backlash and quantization. (2018)

Reading material on: antiwindup and friction

Monday 26/11: L9: Lyapunov-based design and sliding modes. (2018)

Wednesday 28/11: L10: Optimal control: The Maximum Principle, examples. (2018)

Lab1: Deadzone-compensation for an air throttle in a car. (2018)

Monday 3/12:L11: Optimal control (cont'd). (2018)

D. Liberzon, Calculus of variations and optimal control theory: A Coincise Introduction, Princeton University Press, 2012.

Wednesday 5/12: L12: Dynamic programming. (2018)

Monday 10/12: L13: Internal model control. Model predictive control. Nonlinear observers. Gain scheduling. (2018)

Wednesday 12/12: L14: Course summary. (2018)

Lab 3: Optimal control of pendulum an a cart.

### Exercises and Solutions

Exercise schedule and problem set

### Laboratories

Lab1: Deadzone-compensation for an air throttle in a car (nonlinear compensation and describing function analysis) **Sign-up**

Lab2: Pendulum swing-up (Sign-up starts November 26) **Sign-up**

Lab3: Pendulum on a cart (Sign-up starts December 3)

### Software

Matlab and Simulink are extensively used in the course, and can be obtained from here using your StiL/Lucat-account.

Graphical user interfaces called **pplane** and **dfield** for phase-plane analysis have been developed at Rice University, http://math.rice.edu/, and are available for academic use.

For MATLAB 2017a and onwards, use the following versions: pplane9.m and dfield9.m.

For MATLAB 2014b-2016b, use the following versions: pplane8.m and dfield8.m.

### Old Exams

March 7, 2012

April 5, 2013

Mar 12, 2014

Jan 13, 2016